Transmission Mount Insert
Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted especially on diesel vehicles. The stock transmission and upper engine mounts have always been a problem on these vehicles. The rubber perishes and splits, allowing for excessive engine movement.The answer until now has been to replace with new standard rubber mounts or fit expensive aftermarket mounts that are generally prone to excessive levels of NVH transmission.PFF85-530 is an intermediate solution from Powerflex.
Dimensions:
For:
Audi A3 / S3 / RS3 8P (2003-2012)
Additional information:
A3 / S3 / RS3 8P (2003-2012), A3 / S3 / RS3 8P (2003-2012), A3 / S3 / RS3 8P (2003-2012)
The stock transmission and upper engine mounts have always been a problem on these vehicles. The rubber perishes and splits, allowing for excessive engine movement.
The answer until now has been to replace with new standard rubber mounts or fit expensive aftermarket mounts that are generally prone to excessive levels of NVH transmission.
PFF85-530 is an intermediate solution from Powerflex.
_x000D_
Original Equipment Manufacturer number:
1K0199555Q / 1K0199555R / 1K0199555L
1K0199555M / 1K0199555N / 1K0199555AB
1K0199555BE / 8P0199555 / 8P0199555A
SKU: PFF85-530BLK
Reviews
There are no reviews yet.